Best 12 Inch Miter Saw Blades – Features and Recommendations

Published on: April 12, 2022
Written by David Rowan / Fact-checked by Eric Devin

Today, a quality modern miter saw is the go-to tool for generating different cuts. 12-inch miter saws blades have overtaken 10-inch saws blade both on the job site and in the store because this tool became the first choice of professionals and DIY persons.

If you have a miter saw and are looking for purchasing a new 12-inch blade, you may have observed that there are quite a several brands available in the market. Choosing the right kind of blade is not easy because there are a few things you need to look for. So, it’s better to know about blade material, tooth count and so on before buying a new one.

Usually, a 12-inch blade has a minimum of 32 to a maximum of 100 teeth for the most excellent miter saw cutting results. Nowadays, 12-inch miter saw blades are gaining its popularity for its sturdiness and excellent cutting efficiency.

We’ve reviewed a few different miter saw blades below and also included a buyer’s guide to help you acknowledge what features to look for in a 12-inch miter saw blade.

Essential Points to Consider Before Choice

A miter saw is a popular power tool for delivering bevel, angled, cross and other variety of cuts very quickly and efficiently. But these jobs can’t be done without an appropriate blade. So before opting for buying a new 12-inch blade, you should look below features it must have.

Tooth Count

Tooth count matters to get a smooth finishing of your cutting materials. Most 12 inch saw blades you can find in the market from about 50-100 teeth. The more teeth, the more delicate the cut and less possibility you will have to tear-out the edge. 

Like, if you’re trimming, you’ll need a higher tooth count. This will give a more delicate finish. Through many teeth ensures a smoother cut, but fewer teeth are better with cutting thicker objects.

Material And Coating

The performance of a 12-inch miter saw blade mostly depends on its material. Those blades which are manufactured by using high-speed steel, carbide, or steel are more durable. Carbide blades are famous for generating perfect and beautiful finishing. Though they are costly, they can last for a long time. Additionally, steel blades are also a great option, but they might become dull quickly.

Blade coatings are other essential features such as Teflon (PTFE), powder coating, or even chrome serve. These coated surfaces resist blade from rust and make it easily cleanable. 

Types And Design

Each miter saw needs a particular kind of blade. A 12-inch miter saw blade is ideal for all softwood, chipboard, hardwood and plywood cutting applications. General 12-inch blade types are ATB, ATBR, Hi-ATB and FTG. They individually perform differently.

In terms of design, an exclusive spearhead shoulder blade design anchors more steel behind each tip for increased durability and accuracy.

Blade kerf And Angle

Moving forward, the kerf width of a blade is another factor you have to consider. The width of the cutting piece of wood a blade makes is called a kerf. Many people also think the kerf is the thickness of the blade. The thinner blade provides a more accurate cut with less wasted material. 

Vibration And Sound

Noise elimination slots are another modern addition in a 12-inch blade. Also, some are designed to capture the vibration. A dull blade generates more vibration and sound. So always buy a polymer moisten blade to reduce vibration and noise.

Top Selected12-inch Miter Saw Blades-

Dewalt DW3128P5 12-inch Miter Saw Blade

• Weight: 4.2 pounds;
• Material: Carbide;
• Tooth: 80 and 30.

Dewalt is a renowned manufacturer for producing high-quality and unique products. Dewalt DWE7491RS 12-inch blade came in the first position on our list for good reasons.

It comes with two blades in the bundle, one blade designed with 80 teeth, and another with 32 teeth. So that you can cut almost everything easily and quickly from these two blades. Moreover, it is made with hard tungsten carbide to ensure long time sharpness with minimal sharpening during work.

Additionally, the blade is equipped with a thin kerf technology, which lets users move a little faster while cutting. The computer balanced blade plate technology highly reduces vibration while working, and an anti-stick coating minimizes friction and gum-up. So you can expect an excellent finish and improved accuracy.

This blade is ideal for cutting all softwood, hardwood, chipboard, and plywood. If you’re looking for a blade that covers all your goals from a reliable manufacturer, this is designed for you.

Pros

• Comes with 2 blades in one pack;
• Thinner kerf reduces vibration and noise;
• Longer sharpness stability;
• More robust tungsten carbide body;
• Capable of applying force on wood and board;
• Provides smooth and accurate cutting.

Cons

• Fewer teeth than other models;
• Easily get dull.

Concord WCB1200T120HP 12-Inch Miter Saw Blade

• Weight: 4.99 pounds;
• Material: Steel;
• Tooth: 120 teeth.

If you are searching for a blade to cut through hard and softwoods, the Concord 12-inch 120-tooth blade is a great choice. It’s an excellent fit for professionals who use to go through the ripping, shaving off woods and crosscutting more than often. 

The blade really rotates fast, and the thin 3.0 mm kerf design confirmed an excellent finish with little waste to clean up. It can fit on miter saws to produce up to 4500 RPM rotation without any hiccup. The spinning speed is incredibly fast to get the job done in no time.

The most handsome feature of the blade is that it is made of hard titanium carbide, which is the most expensive material. This ultra-sharp ATB grind blade can cut various non-ferrous metals such as aluminum, brass, bronze, copper, and plastic.

With 120-teeth counts, the blade can quickly achieve maximum depth without leaving much of waste to brush off. The lower 15-degree hook angle increases the surface quality of the cut, increases the supply pressure required.

Pros

• Thinner 3.0mm kerf;
• Titanium Carbide teeth;
• Lower 15-degree hook angle;
• Can cut any metal;
• It can fit with different saws.

Cons

• Less stability in cutting hard metals;
• Easily bendable.

Metabo HPT 115436M 12-Inch Miter Saw Blade

• Weight: 2.42 pounds;
• Material: Tungsten Carbide;
• Tooth: 80 teeth.

Metabo HPT blade has similar features like the Hitachi 115435, as it changes its manufacturer name. This 12-inch blade has laser-cut from high-quality Japanese steel to maintain durability and cutting accuracy. It is ideal for dry wood applications like ripping crosscuts and miter cuts.

Furthermore, Tungsten carbide tips are carefully welded to each blade tooth using computerized technology to control the blades’ exactness. An automated grinding process yields accurate tip geometry to increase the ATB C3 carbide teeth’ life and performance.

It is perfect for all cutting needs, from framing and ripping to excellent finish woodworking. Tri-metal shock resistant brazing carbide tips allow the tips to resist extreme shock for maximum durability.

Large micro-grain carbide teeth allow resharpening and increase blade life. Additionally, laser-cut expansion slots reduce vibration and noise. The electrophoresis coating keeps the blade running cooler and protects against rust. It can fit with various types of miter saw.

Pros

• Large micro-grain carbide teeth;
• Electrophoresis coating;
• Tungsten carbide tips;
• Works well in any wood application;
• Sharp edges reduce vibration and noise.

Cons

• Lots of tearing out;
• Slightly more expensive than a similar model.

Freud LU01R012 72T Thin Kerf Miter Saw Blade

• Weight: 2.42 pounds;
• Material: TiCo hi-density carbide;
• Tooth: 72 teeth.

If you are looking for the best suit blade for your miter saw, then go for Freud 72 teeth. That blade would give your underpowered saw a new life; it does not need much power to provide results. This thin kerf blade offers a 33 percent more superior finish cut with sliding compound miter saws. 

Furthermore, this industrial 12-inch thin-kerf miter saw blade built-in ATB style, which allows the teeth to face both left and right. The 5-degree negative hook angels prevent the blade from being aggressive. This blade is performed visibly when crosscutting wood is 1/2 to 2-3/4 inches thick and in a laminated piece. This blade can also split wood, chipboard and plywood, chop thinner or more adhesive materials. It has a 1-inch arbour and delivers a 0.090 kerf.

Even under heavy load, this blade works accurately with its application-specific TiCo high-density carbide crosscut blend. This blend is extra hard, corrosion resistance, heat resistance, and impact resistance that can go longer without sharpening, and will hold up longer to save you time and money.

Freud’s red Perma shield non-stick coating reduces friction and protects your tools and your work surface. This coating eliminates the heat by providing complete thermal insulation and resists jam when engaging in large-volume cutting applications, which reduces blade warp.

Also, the laser-cut and anti-vibration slots reduce vibration and noise at work time. Furthermore, this less vibration design implies no add-on stabilizers needed to use with this blade.

Pros

• Premium TiCo hi-density carbide crosscutting blend; 
• ATB Grind style;
• Negative 5° hook angles;
• Thin 1-inch arbour and 0.090 kerf;
• Perma-shield non-stick coating;
• Anti-vibration and less noise.

Cons

• Aggressive blade ripping;
• Quickly sharpness gets dull.

Khcraft 12-inch Laser-Cut Miter Saw Blade

• Weight: 2.54 pounds;
• Material: Tungsten carbide with cobalt 6X;
• Tooth: 60 teeth.

Khcraft is one of the potent miter saw blades capable of resisting more pressure with its laser-cut technology. It can produce 5,800 RPM with a miter saw to deliver a smooth cut and running cooler. Blades tips are made of professional tungsten carbide with Cobalt 6X, and the body is made of high-quality Japanese steel SK5, which can cut on veneer, decorative mouldings, soft and substantial wood and so on. 

Each blade tooth is welded with Tungsten carbide tips using computerized technology to control the exactness. An automated grinding process produces accurate tip geometry to enhance the life and performance of the ATB C3 carbide teeth.

Moreover, this high-quality Tungsten saw blade has a noise reduction capability, and tri-metal shock resistant brazing allows the tips to face extreme force for maximum durability. Additionally, the electrophoresis coating protects against rust and runs longer.

Pros

• Large micro-grain tungsten carbide teeth;
• Tri-metal shock resistant edge;
• Laser-cut technology reduces vibration and noise;
• Computerized tips welding by Tungsten carbide;
• The ATB C3 carbide teeth;
• Electrophoresis coating.

Cons

• Can’t cut steel or iron;
• Easily tearable and bendable.

Neiko 10768A Carbide Tipped 12 Inch Miter Saw Blade

• Weight: 2.54 pounds;
• Material: Carbide;
• Tooth: 80 teeth.

This Neiko blade arrives with 80 carbides tipped teeth for cleaner, smoother cross-grain cuts while preserving its sharp edge for repetitious uses. The material and sharp cutting edge make it an ideal miter saw blade of severe DIY workers and professionals who need a smooth and clean cut.

The carbide saw blade can produce a maximum 5000 RPM and the one-inch arbour that can be adjusted to 20mm with the arbour reducer bushing. Many cuts can be made with this miter saw blade such as miter, bevel, angled, and crosscuts.

Carbide tipped gives it excellent protection from abrasion. Also, it can handle high heat for a cleaner and smoother cut. As a budget option, it is a perfect choice for wooden jobs. 

Pros

• High abrasion protection;
• Maximum 5000 RPM speed;
• Carbide tipped teeth;
• High heat sustaining capacity;
• One inch arbour;
• Smoother and finish cuts.

Cons

• Larger blade diameter;
• Not suitable for large jobs.

Frequently Questioned Answers 

What Is the Difference Between the Sharp Edges of a Meter?

As a rule, edges with more teeth give a smoother cut and sharper edges with fewer teeth quickly remove elements. A crosscut cutting edge, then again, intended to create a smooth cut across the wood grain, not to tear or tear.

What Number of Teeth Should My Miter Saw Edge Have?

Blend 10-inch edges with 50 teeth and 12-inch with 60 teeth. Ripping 10-inch edges with 24 to 30 teeth and 12-inch edges with 40 or fewer teeth.

How Frequently Would It Be Advisable for You to Change a Miter Saw Sharp Edge?

They can endure somewhere in the range of 12 and 120 hours of persistent use, contingent upon the nature of the sharp edge and material they are utilized to cut.

Conclusion

To sum up, we know that there is a lot to choose from 12-inch miter saw blades. But first, you need to make up your mind for what kind of work you are going to do with the blade and buy one based on your work needs. Now it’s easier for you to take the decision after knowing about each blade specifications we discussed.

As general guidance, let the blade carry on with the work, do not try to force it into the cutting material and use the lower tooth blade for small cuts. If we can help you choose the correct blade for your miter saw from the above discussion, our reviews will be successful. We hope you can complete your jobs efficiently with a flawless blade.

Read more:

• Choosing the Best T Shank Jigsaw Blades
• The 8 Best Nailers for Baseboard