Best Arborist Chainsaws: 3 Factors Are Important for Choosing One

Everyone knows this, and chainsaws aren’t just used for fell and limb trees from the ground. Also, doesn’t he work with its required operator off the ground? Always try to make angled cuts safely. But that problem will be faced through the use of an arborist chainsaw. It allows you to keep the position on top of the cutting surface and let the chainsaw’s weight do most of the work, which is especially beneficial for heavy situations.

The big issue of cutting through is nonsense and finding the right one for your needs. Fortunately, these reviews of the top arborist chainsaws should help you make an informed decision. Our buying guide will help purchase one item, here we set up some key factors to consider when making your choice for an arborist chainsaw.

What Is an Arborist Chainsaw Tool?

The arborist chainsaw tool is a kind of chainsaw tool that has been explicitly intended to be utilized by an arborist. They share many highlights practically speaking with normal chainsaw tools, yet they additionally have a few key contrasts.

Arborists utilize these kinds of saws constantly to cut tree appendages and branches. So that trees can be managed without hurting them or different constructions around them. 

These saws are ordinarily lightweight and have a little chain bar, which makes them simpler to use in the tree’s shelter.

When Do You Need an Arborist Chainsaw?

This chainsaw is designed for optimal balance with light and power. And also, the capability of flexible work from any angle when you’re up in the trees. Arborists are mostly climbing to get to the top parts of the tree. The lightweight design and maneuverability of arborist saws mean that they can easily reach a difficult place while still working efficiently and safely.

Read more: Chainsaw Tachometers

How to Use this Chainsaw?

You are getting five basic cutting techniques from our reviews that can be applied by most of the people during every chainsaw operation. Make sure you are comfortable and have experience using it before undertaking new cutting techniques.

In-Board and Out-Board Step Cut

In-board step-cut – If the branch is larger, there are maximum chances that the saw should be held down with the branch if it does not use this. Out-board Step Cut – When cutting side branches, one should start with an undercutting that fixes the landing branch angle. The cut may be about 1/3 of the branch’s width, and the top must remain unobstructed. On the other hand, keep the risk of kickback.

Free Fall of Scarf Cut

This cut was put to use by arborists to direct the angle of a branch’s descent. Cut around 1/4 of its thickness off the branch. Make sure not to cut all of the ways through. Keep a grip that will allow the branch to be directed.

Hand-Held Step Cut

This technique is designed to be used for small and horizontal sections of wood. The chainsaw should be put off and placed securely into the harmless. If the cut was not enough and realized free to continue using the saw to end the task.

Vertical and Scarf Cut Hand-Held

This step cut is mostly similar to the hand-held step-cut techniques described over. The branch required a great amount of control, and it was made with the saw-vertical. It will allow the arborist to hold this section during the time able to maneuver the saw as intended.

A scarf cut should be made at the top section of the branch. A back cut should be made on the bottom section of the wood, in line with the scarf cut. Make sure that a narrow piece of wood grip is maintained.

See more: Chainsaw for Large Trees Reviews

Security Features

Before you make your decision to purchase an arborist, chainsaws should look at its security features. Throttle lock and chain brake are primary features of safety. The chain brake is crucial because it makes those kickbacks dangerously limited. Throttle locks are another ideal feature to have, but it is not included on every single chainsaw.

What to Look Before Choose an Arborist Chainsaw

There are many chainsaws on the market, but not all of them are exactly for professional use. If you want to buy a model that can handle your job’s needs, there are several things to consider.

Engine

Usually, people need a chainsaw that can handle a serious workload. You want a roaring gas chainsaw that can slice the hearty conditions with ease. The first thing you need to rekon is the engine how much power it delivers. When purchasing a chainsaw, you need to judge the power of the engine.

Bar Length

Focus-on the bar length. This is the longer part of the tool that sands out from its body and secures it. If you want to buy the veritable chainsaw for your job, then first consider the average breadth of the trees you plan to cut down. The longer the bar is given, the faster and deeper chain cut. 

Ease of Use

A chainsaw is a forceful tool, but it can also be risky. You don’t want to purchase a heavy tool and feel off-balance. Combating issues like these are going to take a toll on your body. It should also be designed with comfortable handles, which allows you to firm grip.

Read more: Beginner Chainsaws for Maximum Convenience

View Top 8 Arborist Chainsaws Reviews, Below

1. 40V BLACK+DECKER Arborist Chainsaw

• 40-volt lithium-ion battery;
• Chain 12 inches;
• 10.4 lbs tool weight.

The larger and more powerful BLACK+DECKER arborist chainsaw can do more work without any effort than any small chainsaws, with its 12 inches chain and the 40-volt M.A.X. system lithium-ion battery. It comes with a battery and a charger or as a bare tool. This arborist saw and oiling system, which is fully automatic in this model.

So this device is a simple way to use for little occupations around your area. Ensure the security manual before working this saw. You will have to have a presence of mind at what point you are utilizing this gear. It is built-in high quality and its lightweight design is easy to use.

Pros

• Lightweight;
• Affordable cost;
• High safety features;
• Automatically oiling system;
• Easy to chain adjustments.

Cons

• Tends to leak oil.

---

2. Makita XCU07PT Lithium-Ion Chain Saw Kit

• 14-inch chainsaw;
• 0-3,940 FPM speed trigger;
• L.E.D. on/off switch included;
• 18V L.X.T. lithium-Ion batteries.

If you prefer a top-handle chainsaw’s convenience, then the Makita XCU07PT will be a great buy. It is a 14-inch chainsaw that will deliver motor speeds of up to 3,940 FPM to make it great for fasting cuts. This arborist chainsaw runs on two 18V L.X.T. lithium-ion batteries that deliver power and performance long run times. The battery has L.E.D. pointer lights, which show the saw how much charge is accessible. And also a relatively quieter chainsaw with less noise.

The tool-less chain adjustment provides easy maintenance and has a rubberized grip to make it comfortable to apply even pressure. It comes with a front handguard that will actuate the chain brake for safety. The instant start-up is also perfect, and the chainsaw is ready to use.

Pros

• 2 extra batteries included;
• Brushless motor system;
• Automatically shuts off when operation is delayed for extended battery life;
• Safety and security features were also added.

Cons

• Its runtime will be short when it is fully charged.

---

3. 16-inch Oregon Self-Sharpening Arborist Saw

• 4.0Ah Battery Pack;
• 16-inch chainsaw;
• Brushless motor;
• Tool Weigh 12.0 lb.

It is a quality arborist chainsaw that has an expansive element to guide you through the cutting application. Professional, commercial, and homeowners get their tasks done easily with Oregon saw. This lightweight chainsaw can be used for all types of trees slash and longer. It would not be good for heavy tasks. There is a minimum noise level and also safe to use hearing protection for longer.

The 16-inch bar and the chain has a narrow nose for safety against the kickbacks. You have to keep the chain sharp, that it doesn’t stop working. This arborist chainsaw has a 40 volt 4 amp hour battery, which delivers a rich string of power. The automatic oiler system helps to do your task without any effort.

Pros

• Lightweight;
• Automatic oiler;
• Built-in a solid design,
• Powerful battery included.

Cons

• A little bit expensive.

---

4. WEN 40417 Arborist Chainsaw

• 40-volt lithium-ion;
• 16-inch chain;
• 4 Ah battery;
• Brushless motor;
• Automatic chain adjusting system.

A maintenance-free battery operates the WEN 40417 chainsaw. This arborist chainsaw comes with a brushless motor that will improve the life of your tool. It has a 16-inch Oregon chain that runs efficiently and also includes a 40-volt lithium-ion battery and charger.

Forget the maintenance of gasoline. It operates at a fraction of the noise. Also included a 4 amp-hour battery for an easy sewing session. The WEN 40V max series makes your yard work easier than ever by their fade-free lithium-ion battery and charger.

Pros

• Included charger;
• No maintenance;
• Self-lubricating system;
• Lightweight with a compact design;
• An emergency chain brake included.

Cons

• Is not ideal for heavy tasks.

---

5. 14 inches Litheli Chainsaw

• 14 inches Oregon chain;
• 40V lithium-ion battery;
• Item weight 11.7 pounds.

Litheli comes with a 40-volt arborist chainsaw with a brushless motor, which gives it a big boost. This motor delivers vibration-free torque at 6000 RPM for easier gardening. Most people choose the chainsaw for its two systems that work automatically. The first one will be an automatic oiler system, which keeps the chain lubricated every time.

And the second one is a tool-free tensioner system, which causes easy adjustment of the chain. It has a double brake system and also a safety lock included. Its two handle design is for your comfort. The Litheli saw is one kind of product that will impress you with its amazing strong features.

Pros

• Powerful brushless motor;
• Automatic oiler system;
• Double protection steel;
• Included dual-brake system.

Cons

• This arborist chainsaw is reliant on batteries.

---

6. Husqvarna T435 Arborist Saw

• Lightweight;
• Powerful chainsaw;
• Blade size 24 inches;
• 60.3cc gas motor.

Husqvarna is well-known by everyone for its most reliable chainsaws. The T435 arborist chainsaw is one of them. It comes with a 24-inch blade and a 60.3cc gas motor that sends its gliding without any effort through trees, stumps, and logs. All that power delivers the slight drawback of taking up some space.

That means this saw is pretty big and larger than other chainsaws. This saw might be a bit heavy for smaller peoples and making it more difficult to use. This arborist chainsaw is very well-built and includes excellent safety features with high-quality materials.

Pros

• Easy to start;
• Powerful chainsaw;
• High-quality materials;
• Excellent safety features included.

Cons

• A little bit heavy forms another chainsaw.

---

7. 20V DEWALT MAX XR Chainsaw Kit

• 20-volt battery;
• Auto oiling system;
• 12-inch chain;
• Chain speed 25.2 seconds;
• 8.8 lbs of total weight.

This is a lightweight and high-performance arborist chainsaw. Most of the people like this saw its cutting power. It’s a motor that gives you a lot of power. It uses two 20-volt batteries to power the motor that delivers high-speed with extended run time. And they also provide for tool-less chain adjustments by the switches, that is the side of the saw.

Besides, another advantage is, it gives low noise levels. There is a front handguard for safety, which makes this an excellent chainsaw for use in harsh conditions. The good things about this saw are more comfortable to use. Overall, it comes to quality assurance, Dewalt Max XR can be a good choice for your task.

Pros

• Good battery run time;
• High speed and performance;
• Tool-less chain adjustment;
• Easy start-up process;
• Comfortable to use;
• Faster cutting speeds;
• Built-in high quality and durable;

Cons

• Higher prices relatively.

---

8. CS-271T ECHO 12 In. Chainsaw

• 2 stroke oil system;
• Oregon bar and chain 16 inches;
• Item weight 10.65 lbs;
• 12-inch bar length.

Many factors make the ECHO CS-271T an ideal arborist chainsaw. The excellent power-to-weight ratio will impress most of the arborists and homeowners. It is a relatively heavier chainsaw and still easy to take up a tree. And the massive power that you can make more cuts up hence making it one of the good arborist chainsaws on our list.

This chainsaw has a heavy-duty 2-stroke engine with low emissions. Also included a convenient gear-driven oiler to improve its overall performance. This arborist also comes with an advanced anti-vibration system that provides users comfort.

Pros

• Easy to starting;
• Excellent anti-vibration system;
• Heavy-duty with a low emission engine.

Cons

• Relatively heavier.

---

Frequently Asked Questions

How to Learn Operating One

There are many huge resources on the internet, which can help you to operate your saw. The good way is to place it on flat ground by pulling the start control on the section and hold its front handle with your left hand as your right foot on the back handle. Make sure to analyze danger before operating a chainsaw safely.

How Much Do You Need to Charge a Chainsaw?

The arborist will give you free of charge. If you’ve a large area with many trees and are not looking for lifting but more site evaluation, we can give you consulting services at an hourly charge.

What is a Certified Arborist?

It is an expert in the care of trees. To become a certified arborist, you must be enrolling in the arborist apprenticeship program. Also, complete 5400 hours of workplace experience under the supervision of an Ontario certified arborist and 660 hours in class.

How to Cut Down a Tree the Simple and Right way?

However, there are many risks involved with exact tree cutting techniques. Normally, trees should not be cut down; if not, there is no other local option. If the tree is unsafe, dead, or blocking construction, an arborist can provide you with a quote. It is also a great thought to plant a new tree to remove the one.

Conclusion

At present, they are the absolute decent arborist chainsaw equipment that can be purchased in cash, guaranteeing great value. We really want to believe that with the help of this audit guide you can choose the best arborist chainsaw tool for you.

So, if you need to do some pruning or climb a tree, an arborist chainsaw is your ideal choice. This lightweight chainsaw offers you better handling and more control. When you’re looking for a chainsaw, particularly trying to learn a small piece about the available features. The arborist chainsaw that we added in this review was thoroughly researched and will do your job.

You Might Also Like:

• Professional Chainsaws for Cutting Firewood
• Small Gas Powered Chainsaws Analysis