Difference Between Sawzall and Super Sawzall

Published on: June 4, 2022
Written by David Rowan / Fact-checked by David Rowan

Sawzall is a common brand name and is an example of a generic trademark. This name comes from the Milwaukee Electric Tool, which created the first tool of this kind in 1951, and it is widely used in the United States as a colloquial term for tools of this type. (source)

Despite being a registered trademark of Milwaukee Tool, the phrase “Sawzall” is widely used to refer to any reciprocating saw. These saws cut in a back-and-forth manner, much like a handsaw after four espressos.

The SUPER SAWZALL Reciprocating Saw provides up to 150 cuts in 2×12 SPF each charge and generates 15A corded power for quicker cuts than 15A corded reciprocating saws. Tool-less blade replacements are possible with the QUIK-LOK blade clamp, and a rafter hook makes it easy to store the saw between cuts.

How Do You Use the Milwaukee Super Sawzall?

[amazon link=”B0017H5MQC” title=”Milwaukee’s super sawzall” /] first launched in 2013, and at the time, it was described as being the most powerful 18V cordless reciprocating saw on the market.

A blade that travels back and forth in quick motion is included in the design of the saw. It’s best to hold it with both hands for practical use. It’s made to cut a range of materials and may be adjusted to cut at different angles depending on your needs.

This strong tool’s flexibility allows you to cut through metal, PVC, drywall, plywood, and other materials. It uses different blades depending on the material you want to cut. This indicates that the blade may be removed and replaced.

Metal, masonry, wood, plaster, fiberglass, stucco, composite materials, drywall, and more can all be cut with these saws. The appropriate sort of blade for the material you’re cutting is crucial to a good cut.

The Milwaukee super sawzall may be used to cut the wood into a straight line effectively. You won’t have to worry about how to use a reciprocating saw to cut wood straight if you use the appropriate blade and the right technique.

With the Milwaukee super sawzall held in front of you in line with your stomach, press the shoe against the material, aligning the blade to the marked line as closely as possible. Angling the saw slightly downwards, it will begin to rip through the material with the pressure you’ve applied.

Step by Step Procedure of Using a Milwaukee Super Sawzall

Choosing A Blade And Putting It In Place

Before inserting the blade, make sure the saw’s wire is unplugged. Remove the battery pack from the wireless saw to avoid damage when replacing the blade. Make sure you have the correct blade for the material you’re going to cut.

The blades usually contain information on the side about the materials they cut. If yours does not have such information, perform the steps outlined above.

Making sure the blade is 2 to 3 inches longer than the thickness of the cloth is an easy approach to choosing the proper one. The blade will have enough space to go back and forth this way.

On the chuck, press the lever or button. The chuck is the metallic cylindrical element at the saw’s end. It’s the component that holds the saw and has a black or red button on it. It unlocks the chuck and lets you insert the blade when you press it down.

Release the lever after the blade is in place to thoroughly secure it. Make sure the blade’s teeth are towards the handle at this point. The show may then be adjusted to ensure that the blade is steady and long enough.

Prepare the Work Area

Draw a line to designate the cutline on the material you’re cutting. As a guide, you can use a straightedge, a marker, or a pencil. The material should then be clamped to the worktable to keep it in place.

Use a second clamp for further security if the material slips as you push it. If the material is really tiny, you can skip this step and place it on the work surface’s edge.

Wear safety glasses and earplugs to protect your eyes and ears. Dust and particles from the cutting process are common, and they can get into your eyes. Also, especially with dense, thick materials, the back-and-forth cutting motion can be loud.

Make sure you have a firm hold with both hands on the reciprocating saw. If you’re right-handed, use your right hand to grasp the handle and your left hand to support behind the chuck. Until you’re ready to cut, keep your finger off the trigger.

Getting the Saw Ready

Make sure the blade is at the end of the line you’ve drawn. This step ensures that the shoe is flat against the cloth being cut. To keep the saw from kicking back when cutting, apply pressure to the shoe.

It’s critical to make sure the blade hasn’t yet come into contact with the substance. If it does, the saw may not make a clean, straight cut once you start using it. If you’re cutting a spherical object, push it down as hard as you can to keep it from slipping as you start.

Lightly press the trigger with your dominant hand’s index finger. The blade will move back and forth as a result of this motion. Continue to pull the trigger until the saw achieves full speed. For a decent cut, ensure the saw is steady in your hands at this point.

Some folks prefer to use the saw in the reverse direction. In this instance, you can squeeze the trigger with your middle or ring finger.

Variable speed reciprocating saws are available in some models. This function allows you to change the cutting speed according to the material you’re working with.

When cutting wood or drywall, for example, the quicker speed is ideal. A slow setting is appropriate for hard materials like metal since it prevents the blade from breaking.

Cutting The Material

Once the blade has reached the proper speed, hold the shoe firmly on the cloth so that the blade remains perpendicular to it. Slowly advance the blade down the line, avoiding any contact with the substance. Allow the blade to cut through, but make sure it cuts straight and on the designated line.

Release the trigger before pulling the saw out once you’ve sliced through the entire piece. The material will not kick back as a result. To minimize surface area and cut quicker, alter the angle of the blade as you cut.

Set the shoe against the material while performing plunge cuts to ensure the blade is parallel to the surface you’re cutting. After that, squeeze the trigger and tilt the saw to a 30 to 45-degree angle to cut.

Continue to tilt the saw until the blade is through to the other side and it is perpendicular to the material. Cutting holes in drywall or huge panels using a plunge cut is great. When performing plunge cuts, it’s critical to be cautious and make sure there are no cables or pipes under the walls.

Can a Hackzall Cut Trees?

A reciprocating saw is what the HackZall is. This reciprocating saw differs from regular reciprocating saws in that it is just 11 inches long. This means it’s ideal for going into small locations and may be utilized for a range of tasks including electrical, HVAC, and plumbing.

The Milwaukee M12 Hackzall Blade (Wood) is a small reciprocating saw blade that may be used to cut wood and wood with nails embedded in it. For better tooth endurance and more cuts per charge, the M12 Hackzall Blade has a bi-metal structure and a small kerf.

Conclusion

Sawzall is used for a variety of cutting tasks. This saw can help you cut in hard-to-reach regions, depending on the sort of job you’re working on. It’s a useful instrument that may be used to cut a variety of materials with the correct blade.

If cutting speed is your primary goal, the Milwaukee m18 fuel super Sawzall is now the best option. Its pricing is reasonable, and it has all of the features you’d expect from a professional reciprocating saw. The only thing you’ll have to ask yourself is if the size and weight are too much for demolition work.