Miter saw is powered by electric power to keep pace with modern time. Its edge is round, which continues turning when you plugin. The main feature of a miter saw is that you can cut wood or board of any shapes and any angels with it. Carpenter can create anything with the help of this. It works very quickly.
This saw has to be placed on a stand. So before work, you must be placed on a stand perfectly. Some days ago, when the coronavirus attacked the entire area, I really needed a miter saw stand for my work. But I cannot buy it because of the pandemic situation. Then I look at the internet and learn how to make a miter saw stand easily at home. You can easily make a miter saw stand if you want. In this article, I will guide you on how to build a miter saw stand easily.
Build Miter Saw Stand Easily With 3 Steps
If you are feeling nervous, just relax; it is so easy to build. You can easily make a miter saw stand by taking a few steps. It is effortless to make a miter saw stand by following step by step. Details are shared below.
You can stand the height you like. To calculate the height and cut at your convenience. I made my miter saw that is 36 inches tall. First, you have to cut wood or board. Make square size frames middle for the stand. Be sure to use screws to ensure that each end is connoted to the other.
In this step, you have to make two frames. Together they one for the saw rack and another one is the base rack. Again made two frames the same way. These two are for use as a wing of the miter saw.
On these steps, it’s time to fix legs on the mainframe. Line the advantages, so they’re close with the edges and lower part of the principal outline. Of course, lock them with screws. After that, you have to fix the folding parts. For this, I use some self-tapping screws and washers. Line the section up with the outward of the leg, balance them, and adjust it at the top so that it cans the wing part.
Utilize a 6 inch bit to reach in the section and join the leg parts. Now you can remove the screw, arrange the section where it should have been, and afterward utilize a washer and that is equivalent to 2 1/2″ screws to ensure the exceptionally top of each section. So that screw and joint maintain the balance and easily hold the section. Always lock the screw perfectly.
This is the final stage. When the sections are made sure about the legs, position the wings and append the sections to them. The sections ought to be focused on the lower part of the wing 2x4s. Ensure all surfaces are square shaped.
Fold the full part of the wings and connect the locking casters to the base. Locking all things is very important. To lock the casters, I use 12/4 inch screws and well brand washers.
At the end attached the tabletop. Secure tabletops with screws perfectly; otherwise, your whole job will be ruined. Yes, now your miter saw stand is ready. Now the stand is ready, set your miter saw on it. Follow the instructions when you are setting the saw.
Whatever You Have to Need
If you plan to make a miter saw stand first, you need some essential pieces of equipment. Below is a shortlist of everything you need to make a miter saw stand.
- Drill machine
What materials you need depends on how you build the stand. So, decide what kind of miter saw stand you will make, then make a checklist and go to the shop. Due to the pandemic situation, I brought the products online.
What Materials Are Required to Build a Miter Saw Stand
5. Miter saw
7. Circular saw
9. Tape measure
12. Paint or stain
13. Casters (optional)
I hope this guideline helps you to build a miter saw stand easily. There are no hard and fast rules that you have to follow in my guideline. You can design as you wish and subtract some additions for convenience. Now it’s time to cutting and shows your creativity on your projects. Always maintain safety when you use any kind of saw because safety is the most important part of a miter saw. Try to use a safety kit like glass, gloves, and noise control earplugs.
You might also like:
- 10 Best Sliding Miter Saws for Homeowner
- How to Choose Best 12-inch Miter Saws
- What is a Track Saw Used for? 5 Different Uses Analysis
About This Writer
Hi, I am Eric Devin and I am a professional interior architect. Since childhood, I've always enjoyed DIY projects! And, I have loved to solve simple household problems using essential tools and equipment. I have also acquired a lot of information about basic household tools settings by working with contractors.