7 Best Benchtop Metal Bandsaws

Overwhelm with the versatile cutoff tools. But why to invest in benchtop metal band saws? Any guess? Compact bandsaws suit for contractors. But most for craftsmen and DIYers. Most of your cutting success depends on the right choice, even if it is woodwork or a metal project.

Some also come with their own table. Underneath, a carrier stands to elevate the work surface. Even offer 10 inches or 14-inch benchtop band saws.

A bandsaw’s size is a big deal as a furniture maker needs at least 14”-16” bandsaw. If it holds a table and stand, it works much better. For more heavy-duty and larger works, need 18”-20” ones.

What to Consider to Select a Benchtop Metal Bandsaw?

Design

In general, band saws are for upgrading users. Including metal, brass and aluminum cutting. Equipped with basic features and components. But two major areas one should consider. Built-in frame and table of cast-iron or steel. Neither vibrates while offering portability, vertical or horizontal rip positions. 

Wheel

Wheels are the most influencing part. In case, controlling saw behaves on ripping materials. The heavier wheels may deliver consistent cuts. But the aluminum ones-lightweight are not. 

Motor

Matters a lot while continuing a benchtop bandsaw. Empowered by electricity in terms of horsepower. Take a look that the HP is higher than 2. Except for the biggers, it belongs to the smallest ones. Neither can you utilize it.

Blade Guides 

Ensure that two blades are set at the exact place because any mismanagement with this can not only cause harm. But also will not let preferred cuts to desired angles.

Safety Equipments

The safer the saw the more usage demand raises. Kind of a rule of thumb manufacturing a benchtop metal band saw. Lack of kickbacks prefers continuous cuts in a single direction. So the models are worth the money  

Now See Our Top 7 Benchtop Metal Bandsaws Analysis

Do you really need a benchtop band saw? Unless you wanna determine the shape of thick workpieces. Even in resawing materials into thinner slabs. Except for woodworks in better ways. With maximum blade heights of 3½”. 

Before purchasing benchtop metal band saws, get ideas from trusted sources. This will assist in the selection and is worth your money yet.

1. WEN 3959T Benchtop Band Saw

• 2.5 amp motor rotates;
• Blade Length: 2 Inches;
• Speed: 2500 FPM;
• Blade up to 2500 feet per minute.

Many band saws of the two-speed blade are available in stores. But the high-powered ones like WEN 3959 are rare. Bevel the work surface up to 45˚ on the right and make angular cuts up to 3.5 “deep and 9” wide.

The 12-1 / 4 “x 11-7 / 8” wide work surface helps you get the job done with enough space to stretch. The spacious table with stand comfort for tasks. Helps in high specification projects by a ⅜” blade of 6 TPI. What about the residuals or dust? Well, a 3 in 1 dust port serves for.

Is this one beneficial for you? Of course. Neither finds a better one with the adapted power.  

Pros

• Flexible work light;
• Capable of cutting mild steel bar; 
• A miter gauge;
• Easy-to-assemble the stand.

Cons 

• Useful for professionals;
• Tedious adjustments.

---

2. Grizzly G0803Z Benchtop Bandsaw with Laser Guide

• 9″ Cutting Throat;
•  Blade Size 62-inch;
• 1/3 HP Motor – Steel Frame & Doors;
• Blade speed: 2460 FPM;
• Includes rip fence, adjustable blower, &  laser guide.

Perfect for those who are searching to start their band saw creating careers. From wood to metal, any materials are possible to chop. With a single blade speed. 

This is a strong, very much constructed machine that includes a 62-inch cutting edge and acknowledges edges up to 3/8 inches wide. It can slice pieces up to 3.5 inches high and has sufficient ability to slice through green woods and thick materials.

Changing cutting edges and changing following and strain is straightforward and the little impression and top handle make moving it around your work area simpler. The saw weighs under 50lbs so you can likewise easily move it between your home, shop, or place of work.

Pros

• Beginner-friendly;
• Rip fence;
• Perfect control over every cut;
• EZ blade view;
• Acts like a wobble saw;
• Best for lightweight works.

Cons 

• The significant drop in power.

---

3. Klutch Benchtop Metal Cutting Band Saw

• Blade speeds of 125–260 FPM;
• The beveling blade makes cuts from 0-60°;
• Overall Size: 28.34in.L x 25.2in.W x 27.56-inch;
• 400 Watt;
• 110 to 120 Volt motor generates 2000 to 4200 rpm.

Another vertical model from Klutch. The compact design is not only to show off before users. But to provide unlimited access also at job sites. In the case of, own innovation or professional cutting hacks. As well as copper, steel, aluminum, brass, and so on.

Variable blade rotation ranges from 125-260 FPM. In comparison, tilt knobs and onboard tension systems offer slight adjustments. For operating safely and tweaking between jobs with this band saw.

Pros

• Inexpensive;
• Larger bevel angles;
• Quick-positioning vise;
• Compatible with a variety of metals;
• Powerful motor.

Cons 

• Bad build quality.

---

4. Rikon 10-305  10” Bandsaw With Fence

• Motor: 3.5 AMP;
• Bevel Cuts: 0-45 degrees;
• Table Size: 13.75” x 12.5”;
• Blade speed: 2780 FPM;
• Type: Rip fence bandsaw.

Maintaining all features from both series 10-345 and 10-325. RIKON 10-305 scaled-down with a solid steel design. A suited steel plate frame rather than other manufacturers.

We recommend this to shorter rip capacity bandsaw lovers. In particular, to hobbyists to drive into 1.5” bare woods. A perfect and sturdy work surface, unlike other ones. Because a cast iron table adjusts the workpiece. Being elevated by the underneath steel stand.

Also, it offers a rip fence and large blade tension knob with a safety paddle switch and a miter gauge. A 2.5” inch dust cleaner collects chips after cuts.

Pros

• 4-⅝” cutting capacity;
• Micro-adjustable guidepost;
• Edge facing thrust bearings;
• Comfortable transporting and storing.

Cons 

• Physical discontinuity.

---

5. Kaka BS-85 Metal-Cutting Benchtop Bandsaw

• Motor: 1.5 AMP;
• Angle Cuts: 0-45 degrees;
• Table Size: Unknown;
• Blade speed: 130-288 FPM;
• Type: Metal cutting bandsaw.

Listed 4th is the KAKA Industrial BS-85 benchtop bandsaw. Featuring aluminum casting construction. It even ensures portability under heavy-usage. Worth from the name in industrial works. Some other features that ensure safety at home-based projects. As well as stepless speed regulation and block feeder.

The unit comes with a 0-45 degrees rotation blade—circular cuts 2.76” and rectangular 2.56” x 2.95” at 45°. As the blade size, the band saw takes 0.75×0.04×93 inches. The block feeder leads a fixed blade length. Also, automatic shut off and adjustable roller blade guide. Provided to prevent unnecessary losses during operations. A quick clamping vise handle allows you to unfasten the workpiece.

Pros

• Simple switching of chop angles;
• Frame lock;
• Lightweight and stable cut procedures.

Cons 

• Useful only in 110V countries.

---

6. Eastwood Portable Benchtop Metal Cutting Bandsaw

• Motor: 1000 Watt;
• Miter Cuts: 90-45 degrees;
• Table Size: Unknown;
• Blade speed: 100-260 FPM;
• Type: Portable benchtop bandsaw.

Last but not the least. We have experienced the above models shown. But this one is quite different from the unpopular list. 

It is an intense cut model of around 8 AMP engines. Sounds powerful one, right? Well, a 52” long blade with 12-14 TPI. A 4.5” W x 3.25” L rip is possible with a single pass. A pistol grip handle helps to set the metal piece to customize.

Do not worry if you miss the fasten. The speed control trigger manages the cutting speed. For accurate and faster cuts in a horizontal position. Materials like bronze, plastic, and aluminum.

Pros

• Handgrip to unfasten workpiece;
• Precise and smoother cuts in different shapes.

Cons 

• Unable to cut in the vertical position.

---

7. POWERTEC BS900 Benchtop Bandsaw for Metal-Cutting

• Motor: 2.5 amp;
• Miter Cuts: 9”;
• Table Size: 11-3/4-Inch x 11-3/4-Inch;
• Blade Size: 62”x ⅛”x ⅜”;
• Type: Induction 1/2 HP.

POWERTEC miter gauge combo is designed to be an essential woodworking tool for delivering accurate chunks, cutting irregular shapes up to 3-5/8″ deep & 9″ wide, and ripping lumber into more tenuous pieces. It’s a requirement for any DIY woodworker/professional workshop.

The benchtop band saw runs flawlessly and makes all the cuts required for this light-duty use. The motor may be a little underpowered, but if you let the saw cut at its own rate, it’ll do an honest job. I like to recommend this product for anyone trying to find a “hobby” type band saw.

It doesn’t have a dust collector device. You have to use your own vacuum while cutting, or after you finish, you’re employed. Drilling, sawing, sanding, or machining wood products can expose you to wood dust, a substance acknowledged to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.

Pros

• Cheap and Handy;
• Clean welds.

Cons

• Very low power.

---

FAQs

Are Rikon Bandsaws Any Good?

The Rikon 10-305 is a splendid benchtop bandsaw for creating difficult chunks in wood or plastic. It’s quite affordable and features a rich set of helpful linement that makes it very competitive. We recommend this model for newbie to semi-professional use.

Do I Actually Need a Bandsaw?

The thickness of material: Like we already mentioned, band saws are the higher choice if you would like to chop through really thick pieces of fabric. Standard table saws usually have a maximum blade length of about 3 ½”, so anything thicker than this and you will need a band saw.

Final Thoughts

Several portable benchtop metal band saws are available. May the above not be what you are looking for. We only refer to giving some thought. As well, the purchase always relies on your exact needs. So we may be wrong to list the best for customers.

Once your budget is the most important factor, narrow down a standard version with powerful and necessary components.

Related Posts:

• A Guide to Finding Perfect Bushcraft Saws
• How to Choose Best Metal Cutting Saws
• Scroll Saw Blades: How to Choose