Sprayers for Deck Stain: Selections Guide And Top Picks

Published on: March 7, 2022
Written by David Rowan / Fact-checked by David Rowan

Started a staining project yet disturbed with manual ones as it is time-consuming? Well, sprayers for deck stains in both corded and cordless models are available in the nearest stores. Even featuring more precision and staining in a time fraction are reasons prospective users and novices switch to such trendy ones. 

However, one should stain on clean and dry deck boards, which is almost possible with handheld planers. Instead of ready info, sorting through spending hours after hours either on primer spray guns or deck sprayers right now is a bad option, isn’t it?   

From the fierce dog-eat-dog competition, below-deck sprayers have achieved top places, though we have depth-researched before briefing these to users. A read thoroughly will be an accurate kickback for you in a series of such sprayers for deck stain and a complete buyer’s guide with all info and FAQs.

What Is A Stain Sprayer?

This is a type of sprayer that is better aligned with the stain. Only one stain in each weird paint sprayer can spray, so knowing which one will help you separate a ton of cash and time.

Similarly, it allows you to easily shower a large surface without destroying it.

How to Select a Sprayer for Deck Stain?

Shopping for a sprayer to stain is neither much easier nor very difficult. As if, there are lots of brands, attending as the best aftermarket ones, which is very overwhelming.

Also, from the enlisted deck sprayers, difficulties you may have to confront. To avoid unnecessary combats, the buyer’s guide below will assist much. Read more: How to Pick an Accurate Primer Spray Gun  

Tips

How much a sprayer with paints is applicable relies on this most exclusive counterpart. Especially then, when it is about staining over large or mid-sized projects. Because stains, in general, are very fab as mixtures of thinner materials. As medium-size as possible, however, ranging between .11mm-.13mm is well enough for stains. 

If the purchased model, as usual, offers either HVLP or bottom feed without such tips, you should buy as per your staining jobs. Though it is a deal-breaker, spending some money will be worth more except for the tips included in the sprayer toolbox. 

Power

The huge power a deck sprayer has on offer, the faster you can stain no matter how the pattern or the machine style is. Sometimes handheld-styled spray machines come with hand fatigue and hours and hours for accomplishing tasks. Whether similar, for instance, Fuji series 2203G sprayer. Well, the higher the price goes, such an advanced styled tool will make no earthing down, except for if you want a kickstand base and on-board storage system tool.  

One with a high-powered motor is quite heavy too. If it does not have enough transportation capability, it will become a big waste. But another important fact you should not skip. Well, it is a pressure optimization rating and flow rate. Read more: A Guide to Choosing the Best Ladder for Painting

Adjustments 

Featuring a piston pump with a sprayer for deck stain is a breeze. Not only about a perfect adjustment, but also maintaining the flow rate for avoiding overspray disappointment. However, the adjustment is kind of a maintenance part, whether it is about cleaning the cups and might be the whole tool, which becomes vital. 

Either you need to slow down the staining rate or increase the pressure optimization rate, and all need adjustments. So, it is crystal clear how much it can make a sprayer versatile for different levels of staining projects. Even we call it the most fab and for the money model. 

Type of Paint

Different paint sprayers are more qualified for particular kinds of paint. For instance, airless sprayers can deal with paints of all thicknesses, including enamels and stains, while thicker paints might stop up an HVLP sprayer.

Inclusion Zone

Is it safe to say that you are painting the whole exterior of your home or just a household item? The area you need to cover will indicate which item is a best-for example, paint sprayers with long extra lines, large paint cups, and hoses are great for large enterprises, while light-weight handheld units are helpful for the little paint profession.

How Do I Clean and Prepare the Deck Before Spraying?

To clean and prepare a deck before spraying, you should first remove any loose debris and dirt from the surface. Next, use a pressure washer or a deck cleaner to thoroughly clean the deck. Allow the deck to dry completely before proceeding. If there is any mildew or mold present, you should use a solution specifically designed to remove it. Once the deck is clean and dry, you should use a deck brightener to restore the natural color of the wood and neutralize any leftover cleaning solution. Finally, lightly sand the surface to create a smooth and even surface for the coating to adhere to.

What Safety Precautions Should I Take When Using a Sprayer?

When using a sprayer, it is important to take the following safety precautions:

1. Read and follow the manufacturer’s instructions for the sprayer and the chemicals being used.
2. Wear protective clothing, including gloves, goggles, and a respirator if necessary.
3. Make sure the area being sprayed is well-ventilated.
4. Avoid inhaling the spray and avoid contact with skin and eyes.
5. Keep children and pets away from the area being sprayed.
6. Store chemicals in their original labeled containers and in a secure, well-ventilated area away from heat and open flames.
7. Dispose of any unused chemicals or cleaning solutions in accordance with local regulations.
8. Clean the sprayer thoroughly after each use to prevent chemical residue buildup and cross-contamination.

It’s also important to be aware that certain chemicals are flammable and can cause fire hazards, and if you are using them be sure to read the safety data sheets of these products and follow the safety precautions mentioned on the sheet.

View Most Searched Sprayers for Deck Stain, Below

With no further issues, while staining deck boards, we have enlisted some tools with high-end tech. As if, no overloading, no overspray, and enough portability, you can aim for one sprayer for deck stain from the below listing.

1. Graco Magnum 262805 X7 Sprayer for Deck Stain

• Tip size: .017”;
• Flow rate: .31 GPM:
• Use capacity: 125 gals annually.

Are you planning to decorate your deck fences? Either want to remove dirt, but lack of time is not allowing you? Well, the fastest sprayer for deck stains we have with multi-purpose features after using a few similar models. 

Yes, speaking of the portable sprayer from Graco, which consists of a stainless screen or piston pump. What a sturdy construction, right? This is an airless sprayer, many opted out of having an air pressure mechanism for painting, even most of the cheapest ones. However, the more the pressure, the more unthinned paint you can spray on your decorating objects. Inside a 5/8HP motor, which is very powerful, delivers around 3000 PSI that causes success.

More than the power, nothing but something down to the earth we have experienced. The spraying capability, as well as the direction. Well, not only can you have direct spray permission, but also supports itself by spraying from 100ft up to paint the external side of 2/3 story buildings. 

However, only its RAC IV option can save you from clogging-type disturbances. Though quite heavy, instead of handholding, transport through the kickstand on its offer. 

What we liked 

• For heavy-duty painting;
• Fastest spraying capability;
• S.S. in piston construction;
• 100ft. paint delivery hose;
• Rust-free usage;
• Easy-to-clean;
• Enough portability.

Disliked 

• Hefty-priced.

---

2. Wagner Spraytech 0518080 HVLP Paint or Stain Sprayer

• Power source: AC/DC; 
• Hose length: 20ft; 
• Cup: professional-1qt, regular- 1.5qt.

It is kind of a regular sprayer for deck stain removal as if we are still using it. Well, this unit is from Wagner Spraytech, and we like most of its stationary parts. This means whatever the weight will assist you by staying on the ground, and the sprayer demands you to carry on only.

However, we have also tried to apply it as a spray tan. Moreover, in this system, you have to simultaneously push out the correct pressure and airflow, though intended not to overspray. But it has made us realize how the front-end gun became compatible. 

Featuring a 1qt. pro-graded usage paint capacity, also a perfect connection with its base through a 20 feet long hose pipe, makes the overall needs head to accomplish. And, convenient only by letting you move around your job site. 

Speaking of the spray patterns, it varies with the adjustment from .5” to 12”, either as per the painting thickness or the painting flow rate. Expecting to accomplish in faster mode? Its powerful 2-stage motor will help in proper adjustment.

What we liked 

• Accepts different primer bases;
• Easy-to-clean;
• Perfect stationary mode;
• 1qt. paint capacity;
• Long portable hose.

Disliked 

• Heavy-weighted.

---

3. HomeRight C800971 Sprayer for Deck Stain

• Tips: 3 brass- 1.5mm, 2mm, 4mm;
• Cup size: 40oz;
• Use capacity: 2-3 gallons.

It is a plug-in unit with 3 brass tip sizes, for instance, 1.5mm, 2mm, and 4mm, and 2 optional series. As well, such optional 2.5mm and 3.5mm make it stand out from the present regular crowd. But the basic ones are available for basic oil-based paints, Polyurethane, stains, and more. 

But we found the manual to be quite terrific. Quite no thinning is required, but slight thick paints you will require to lay down on a cardboard piece. 

However, the smartest choice for entry-level spray users. Thanks to its settings and no thinning features. Well-enough for homeowners, as if, it provides surface pro-graded finishing, except for automotive applications. Delivering spray powers with inside motor power, about 450W helps such latex primers to accept. 

It is quite adjustable and mentioned for adjusting its air cap to horizontal, either vertical or round pattern and material flow. 

What we liked 

• Easy settings;
• Capable of spraying unthinned paints;
• Adjustable counterparts;
• Easy cleaning brush with toolbox;
• 40-ounce container capacity;
• 3 brass and 2 optional well-constructed tips.  

Disliked 

• Handheld model. 

---

4. Fuji 2903-T70 Sprayer for Deck Stain

• Pressure: 6.5PSI;
• Motor type: 3-stage turbine; 
• Hose length: 25ft; 
• Tip: 1.3mm; 
• Cup: 1qt.

Kind of a foam filter that works well and avoids contamination, including overspray. Yes, talking about Fuji manufactured 2903-T70 series sprayer for deck stain. Well, you have to remember to keep it apart from the selected spray area which may avoid ingesting overspray. 

Compared to other models, it is very quiet, even when we have started it at the highest turbine speed. Sounds high-end tech integrated, right? It is definitely worth your price, but some guidelines may not ever keep doing detailed project accomplishments with enough comfort. 

Its bottom feed comes with a single nozzle spray, about 1.3mm, and never dries out any type of paint. Besides, the attached only 1qt cup lets users continue their painting projects without hesitation, even with less refill. It does not happen in most of the advanced HVLP sprayers, even after advanced ones with high-tech. However, painting in confined areas, the success rate can be reduced through this unit.  

What we liked 

• Covers large enough areas with less refill;
• No noisy operation;
• Provide industrial-rated success;
• Compatible with huge pressure;
• Portable Enough;
• Well-balanced and constructed as well.  

Disliked 

• Very expensive. 

---

5. Earlex HV5500 HVLP Spray Station

• Tip size: 2mm; 
• Hose length: 13ft;
• Cup: 1qt;
• Pressure optimization: 2.2PSI.

Jumping to the next Semi-pro unit, HV5500, manufactured by Earlex. To get you to the pro level, the manufacturer has advanced this unit with exceptional and well-known push-and-click tech. Not only does the mechanism alternate spray patterns in between painting projects, but it also provides a dynamic controlling power. Even for achieving showroom finishes on doors, cars, cabinets, and trimmed surfaces, we neither have found a better unit.  

It pleased us though often the overloading creates issues. Scaling that power, quite fast through the 13ft air hose and from 1”-12” fan widths, even faster using fewer materials. Apart from that, portability ensures through its integrated onboard storage mechanism. And, we loved the heaviest spray tool moving by the perfect carrier, both on operations and changing painting patterns from vertical to horizontal to round. 

Unlike other sprayers for deck stains, it is compatible with both thick paints, including the inside. Also, its 1-quart container, coated with Teflon, will make cleaning easy.  

What we liked 

• Push-and-click mechanism; 
• Plug-in sprayer with extra cord length;
• Easy cleaning;
• Includes wrench; 
• On-board storage system;
• Great turbine unit.

Disliked 

• Expensive;
• Slight overloading issue.

---

6. Graco Magnum 262800 Sprayer for Deck Stain

• Tip size: .015”;
• Hose length: 25ft; 
• Flow rate: .27 GPM;
• Use capacity: 125 gals per year.

As it is also manufactured by Graco, leading to a similar powerful model on the top. The pattern is no longer different, except for its 5 times extensive airless cap. 

Featuring a Stainless Steel piston pump. It increases unthinned spray capacity acceptance and provides a better paint-controlling flow rate at an ideal pressure. For example, we have tried spraying on deck and very confined areas at 2.2 PSI, which has been mentioned in the manual. The success rate was so ideal that it intended us for further purchase, though all of it comes in a big-budget pack.  

It is worth its title, like Magnum X5, because the perfect speed leads to instant startup with higher performance at the same time. Even the 25ft doubling capacity air hose length is near your hands. 

What we liked

• Pump Armor storage fluid;
• Handles both indoor and outdoor painting projects;
• High-speed performance;
• No clogging happens;
• Includes the right accessories.

Disliked 

• Hefty-priced;
• Not portable.

---

7. Fuji 2203G Semi-PRO 2 HVLP Sprayer for Deck Stain

• Tip size: 1.3mm;
• Hose length: 25ft;
• Gravity cup: 400cc.

Again dealing with Fuji, another series 2203G, a semi-pro level sprayer for deck stain. This High-Quality Volume Pressure (HVLP) optimized spray gun delivers excellent results. Not only for maintenance purposes but also cleaning, even a newbie can achieve it. 

For the most part, stains that you want to use, the right way is waiting without mixing or diluting. However, most of the settings are very easy to adjust and need practices per your jobs within a record time, we hope. 

Whether handheld units are popular as time wastage most of the time, being also in that category, takes more than a single minute to work out. Even a large area of coverage does not matter without hand fatigue. Besides, its gravity feed system gives a perfect ending with a little wipe-off. 

Worrying about disassembly as if similar models offer this disappointment. Well, the well-coated cup always takes only a few minutes to clean while your staining is complete. But the noisy results may drag you down. 

What we liked 

• Fast applications and no clogging;
• Easy to assemble and disassemble;
• Direct can for staining;
• Easy to clean;
• Well-constructed.

Disliked 

• Costly;
• Noisy applications.

---

8. Wagner Spraytech Flexio 590 Handheld HVLP Sprayer

• Weight: 2.11 pounds;
• Gallon acceptance: 5.5 gallons; 
• Covers surface: 8” by 10”.

Enlisted as the last sprayer for deck strain, but not with the least inclusions, even though we prefer those like us who do not consider light primers. Now you might ask us what has attracted us the most. Well, it is its fastest speed of task accomplishment, rather 10 times faster, can you imagine? Even though we did not. Else, might the most happening overloading issue occur for it? 

The spraying capacity of unthinned materials that we are suggesting for applying through this sprayer, X-Boost turbine improved motor helps much. Besides, dialing 10-speed settings allowed enough control in paint adjustments, for instance, latex paints, and spraying capability of at least 5 Gallons per hour. 

As a result, the precise Teflon-coated cup never dulls itself inside, as well, as no more hard cleaning tasks. We forgot to brief on 2-included improved nozzles for separate jobs. Whether spray can remove the largest stocks and cover up large areas as well, finish nozzles are quite smaller for small areas yet provide smooth finishing. However, with detailed jobs, like the trim on furniture exterior siding, cabinets, and similar objects, you will not achieve like a pro. 

What we liked 

• 2-stage motor;
• Lightweight, yet powerful;
• Perfect control and overall ideal settings;
• Suitable for thick and thin paints.

Disliked 

• Handheld design; 
• Paint flooding problem; 
• No uneven smooth finishing. 

---

FAQs

How Does Hose Length Become Important for a Deck Sprayer?

Well, the longer the hose, the higher the capacity to move around your project site. As well, having a heavy-weighted deck machine should need portability as much as possible. Neither perfect staining is quite impossible.

Though by ensuring that most of the branded or non-branded manufactured units forget to exclude vibration during heavy operation. Something exceptional you can try is the Fuji 2903-T70. 

Which Way is Better, Spraying or Rolling?

Well, it depends on one’s experience. With more precision, though, a roller can step forward, especially staining on wood even with astonishing speed. We have experienced the opposite with deck sprayers; however, applying stains with sprayers is good as these accept as much as possible unthinned materials. 

But when you hit the spray, almost under low pressure, you should take in it. Nothing except for slight overspray may happen, even in the case of HVLP. 

How to Stain Decks?

Concerning spraying stains on deck boards, it sounds hectic sometimes. Many professionals ask not to let stains dry, even keep back brush at first with rollers. We prefer something different. Well, yes, it is comfy staining on dry and clean deck boards. 

After smoothing the deck with planers, we should clean it first. Then, turn on the temperature meter. When the temp will range between 55-90 degrees, start your staining project under a shaded place. 

Final Words

And this is it, a definitive list of ideal sprayers for deck stain for both pros and novices. For your concern, we have added something that should keep you on an ideal shopping track—listed both buyer’s guide and FAQs section downward, where beginners will benefit most. 

At the bottom line, happy shopping and happy staining with a deck sprayer. 

You might also like:

• Finding the Best Spray Gun for Plasti Dip
• 5 Best Sanders for Removing Paint You Can Choose
• 11 Best Paint Brushes for Smooth Finish