How to Use a Jigsaw to Cut Curves (Quick Solutions)

Published on: December 20, 2021
Written by Eric Devin / Fact-checked by David Rowan

Straight cut with jigsaws is one of the things that is empty and the woodwork is a bit tricky, in any case, in making a proper, smooth and accurate turning off anything. Especially for clients who are new to the game.

On the basis of popular need, we have, thus, chosen to think of the complete steps of using a jigsaw to cut curves. Excluding the ways, we recorded a range of devices and precautionary measures necessary to feel the same way.

how to use a jigsaw to cut curves

You Have to Cut the Curves Using Your Jigsaw

Obviously, these are the main tools here when we look at cutting curves with jigs. By the way, you need a few separate instruments, excluding these. Also, before we get into the ways, we might want to concentrate on that list.

Scrolling Blade

The edge with which we furnish a jigsaw is called scrolling blades, It is a significant part of the process. For this operation, you need to utilize a thin profile and very few adapt abilities.

The Power Sander

Sanding is a basic piece of a large portion of the carpentry occupations. When you will be finished with cutting the bend onto the workpiece, you need to take a shot at the corners and edges to smooth them up. We consider it the completion, and a force sander will be your device at this progression.


There are several different types of jigs. Still, we want nothing more than to be here, to have a higher RPM. Additionally, it has an unstable speed trigger to ensure that you have firm control over its speed.

The Bend Guide

When you make a bend with a jigsaw, you have to adjust the cutting edge in a certain way, this is the turning profile. Experienced impersonators can do this from their persuasion. Whatever the case, you need to bend right into the off-chance of being new to this activity.

Step By Step Guide: To Cut Curves

Well, where we will take you through several steps that involve turning a jigsaw puzzle into a jigsaw. Furnish yourself with the necessary tools and how we will continue.

Read more: What is the Best Saw for Cutting Trim

The Board Clamp

From the outset, you have to guarantee that the board you are twisting will remain stable all the way to the curves.

For that, put your board on the table and utilize stamping to make sure it is in the ideal position. Make sure you have a larger portion of the board on a table to stabilize it. The other part of the board should hold the airtight, and that is where you get away from here.

To guarantee the first-rate position of the board on the table, you can utilize a barrel. With a large section of expert craftsmen’s tables, there are clips that will surround you here. In discussing the stitches, we recommend utilizing two or three collisions, at any rate, to guarantee safe stability.

Set Yourself Up

The load up is prepared and clipped, the instruments are close by, presently it’s the ideal opportunity for you to prepare yourself up.

We mean that when you run an activity like this, there are different types of safety precautionary measures that you have to keep up. Include wearing glasses, protective gloves, earplugs to keep your ears from flickering that these gadgets will itemize.

Cut the Curve

Spot your jigsaw on the closest finish of the board where the guide begins. Currently, pull it to the power, and make sure the machine has a smooth start.

If you do not have a bent handle, make a point to mark the pencil on the spots. One of the important things about the slicing method that you need to keep in mind is the sharp edge slanting. It happens enough when you are doing so.

To make sure your cutting edge is not italicized, make a point to resize the sharp edge. With a guarantee, go from one end to the next.

Finish Up the Work

When you have finished the work, you need to guarantee that it is done in a legal way. Across the edge of the curve, it should be very unpleasant and you should complete it immediately.

To complete incomplete angles and edges, you can utilize a power Sander to do this. If you don’t have one, you can utilize standard motorsports papers to get it done. When done, the way to cut our curve using jigs is finished.

Read more: What is the Best Orbital Sander with Vacuum Attachment

Safety and Usage Tips

There are different realities that you should keep in mind when you are feeling ways. Here is-

1. Make sure you have your stamping done in a proper way.

2. Get the right saw blade for your jigsaw. Otherwise, it will be converted to a fragmented or improper cut.

 3. Keep the curve situation straight, pretty consistent.

4. While working, remove your hand from the sharp edge.

5. Look at the sharp end and guarantee that it is on the right track

6. Try not to try and start working before you securely clamp the board.

How Can You Ensure a Smooth and Accurate Cut?

1. Use a sharp blade.

2. Use a blade with a very low tooth count, such as a 14 or 18 TPI blade.

3. Mark the line to be cut with a pencil and a straight edge.

4. Secure the material to be cut to a stable surface.

5. Use a slow speed when cutting curves.

6. Guide the jigsaw along the line with steady pressure.

7. Use a jigsaw with a variable speed trigger.

8. Use a dust collection system to reduce the amount of dust created by the jigsaw.

9. Make multiple passes over the line to ensure an accurate cut.

10. Test the accuracy of the cut by inserting a piece of scrap material into the cut.

What Safety Precautions Should Be Taken When Using a Jigsaw to Cut Curves?

1. Wear protective gear such as goggles, gloves, and a dust mask.

2. Secure the material to be cut before turning on the saw.

3. Use a jigsaw with a sharp blade.

4. Start the saw at a slow speed and gradually increase it as needed.

5. Keep your hands away from the blade and do not apply excessive pressure.

6. Make sure to follow the contours of the pattern and keep the blade perpendicular to the material being cut.

7. Release the trigger and wait for the blade to stop before lifting the jigsaw.

8. Keep your hands and fingers away from the path of the blade.

9. Disconnect the power supply when not in use.


It can help you with many activities and tasks at ease and at home. Also, in the above article, I believe you will understand how modestly you can utilize the jigsaw to cut wrap with circles.

I believe this article was helpful to you. This is ideal if you are interrogated and would like to be committed to this article, as you would not hesitate to do so in the comments section. In the event that this article has been helpful to you in any capacity, do not stop for a moment to give it to your peers and various contacts. Thank you so much for setting aside the effort to pursue this article.

You Might Also Like:

Rate this post

About This Writer

author eric devin

Hi, I am Eric Devin and I am a professional interior architect. Since childhood, I've always enjoyed DIY projects! And, I have loved to solve simple household problems using essential tools and equipment. I have also acquired a lot of information about basic household tools settings by working with contractors.

Hi, I am Eric Devin and I am a professional interior architect. Since childhood, I've always enjoyed DIY projects! And, I have loved to solve simple household problems using essential tools and equipment. I have also acquired a lot of information about basic household tools settings by working with contractors.

Leave a Comment