Best Pipe Clamps (Choosing Fact And Our Recommendations)

Published on: February 26, 2022
Written by David Rowan / Fact-checked by Eric Devin

Whether it is woodworking or metal tasks, pipe clamps are potential, only the pro and potential users know well. Working with such easy tools to make your job easier is not a big deal. However, more than holding workpieces together, pipe clamps assist much during operations with their common fixed plates. 

Its 2 plates fix the item within the shortest time. But how? At first, step forward for the “opening” system with its jaws, as in plates, which take a tube in between. Then clasped the object by closing both jaws from both sides.  

best pipe clamps (choosing fact and our recommendations)

You can use the simplest jaws for assembling too. As well as the clamps category, including the crude threading compatibility, all variances can overwhelm most if it is your first purchase. But you should have no interest in spending your valued bucks on an unwanted tool.

Therefore, for help in your purchase decision, our most experienced and simple 10 pipe clamps are below with a complete buyer’s guide. Now, whatever your purchase purpose is, take a severe look at the options.  

How Does a Pipe Clamp Work?

This is a 2-piece clamp that requires a metal line with strings toward one side. One piece of the clamp screws onto the strung finish of the line and is known as the proper end.

The other part of the brace slides over the non-strung piece of the line. And it can slide until secured with the grasp. This subsequent piece is known as the versatile end, and it permits you to clamp the task tight. 

You can buy any length of line and utilize similar clamps for any venture. These are generally more affordable than different sorts and are very sturdy, with most being solid metal.

Factors to Consider While Choosing Pipe Clamp

Clamping Size

The clamp size and compatibility are the fastest and foremost fact in our pipe clamps’ selection guide. As per your project size, you should shop for a pipe clamp or a set. Because the size governed by your project nature helps much more than fixing tubes or pipes, as incompatible threading pipes can cause hand fatigue and cost a lot later. 

Read more: Things to Consider for Best Exhaust Clamps

Speaking of the task size, small pipe clamps precisely for DIY plumbing and similar small household jobs. If you prioritize the larger jobs, assure that your purchased one holds large braces or not. 


Comfy to the blue-collar laborers becomes the last opt-out fact during shopping for pipe clamps. If we have experienced and felt something which is foremost during wooding or metallic projects, that is the right tool’s ergonomic handle. This not only manages day-long work, like plumbing and similar jobs. But often leads to better output. 

Featuring quick release, easy-to-slide lock, and ideal threading capability, you should consider this named opt-out factor. Along with these, does it offer better clearance? It is worth checking whether it is an issue with the price-to-weight ratio. 

Strength and Stability 

How does the power source become a strength? Most often from the construction material, and later the overall design determines it. The structural material, most of which is cast iron and steel, we have noticed in our enlisted ones. As well, as the materials optimizing threshold force, even yields without snapping.

And stability, likewise stated earlier, is possible to avail by clamping pressure. Compared to bar clamps, the clamping force of 950 pounds a pipe clamp can reach in time. For example, a 1” clamp’s load-bearing capacity is 5026 pounds. To strike a good balance, turn the jaws and figure out the capability of pressure-taking. 

Read more: Analysis of the Top 10 Best Hose Clamps

View Our Selected Top 10 Pipe Clamps, Below

1. Bessey BPC-H34 H Style Pipe Clamps

  • Weight: 1.1 pounds;
  • Shape: h;
  • Clamp size: .75-inch.

The most popular pipe clamp set that we are giving a head start on is from Bessey. BPC-H34 comes with an H-style in its cast jaws construction, though the jaws were weighing significantly less. Since we were potential customers, we wanted to check the soft jaws’ durability, and we won at this price.

Featuring the most unique H-shaped foot assembly. The manufacturer has also signified that the chamber of design will ensure as much as possible stability out of the factory. After buying, you will notice that the 2-dimensional firm footing gives additional stability. 

The base layout is high enough from the ground. So, go ahead with its adjustable positioning. Else, the risk becomes invalid while the table gets minimized according to tasking comforts. The rests are clutch components. Speaking of these, one funny part you will enjoy. The cast jaws enable us to strengthen more by oxidation, for instance, something wearing susceptible, even after the surface fades away.

What we liked

  • Proper stabilization;
  • Unique style;
  • Perfect to wear the fragile threading pipe;
  • Smooth action spindle;
  • Durable due to cast jaws.


  • Nothing noticeable. 

2. Irwin 224212 Pipe Clamp Set

  • Weight: 2 pounds;
  • Material: Steel;
  • Clamp size: .5”.

Irwin 224213 is the first quick-grip pipe clamp set in our listing. Not only the potential buyers but also the beginners get attracted by its configuration. And, the simplest but foremost working feature, the in-built steel handle, is about handling much pressure. Even while fixing it on a 1.5” in diameter, and .5” in length project surface, as well as the clamp size. 

The dependability increases a lot while you focus on its large clutch plates. Whenever you step forward for tensioning, the handle reduces hand fatigue by combining clamp durability. Not only that, but additional durability is also noticeable while stretching the large feet. 

On top of that, the damn excellent style even nulled the regular threading pipes needed. All about to go that could not stop us from buying, as if it demands more huge bucks than the previous one. However, no special coating after construction can cause corrosion over time. 

What we liked

  • Ergonomic handle;
  • Large feet;
  • Stretchable in between handle and worktop; 
  • Durable;
  • 2 complete clamp fixtures.    


  • Soon-to-rust issue.

3. Pony 55 Pcs Pro Pipe Clamps

  • Weight: 5.6 pounds;
  • Clamp size: .75”;
  • Material: Cast-iron, steel-hardened screws.

Considering its directing power, it caught worldwide attention. Though a little pricier than your budget, neither found a better one than this. Compared to the same brands’ welding clams, these professionals graded Pony 55 pcs pipe clamps give a better clearance in some specific ways. 

For example, it’s an opening system. However, the entire construction makes it easy as well as the closing before operations. This means you can lose and tighten your workpiece as per your need with minimal interference. However, some consider it a bummer. 

Enables 2.5” fixing capability above the workpiece, even with less effort. Like the first enlisted model, its basic style comes in H-shape. Nothing like similar stabilization power, yet, taller and expanded feet clamp anything, with average skill.

Moreover, its wider jaws convert its comeback into a great value pack. That makes sure more stability, combining the built-in clamp stands. 

What we liked 

  • Ideal for metal and woodworking projects;
  • Drop-forged, cast-iron constructed;
  • Versatile disc clutch;
  • Anodized aluminum made clumps;
  • Unique H-shape.  


  • No pipe supplied; 
  • Does not support coupling.

4. Sumner SUM 781170 Ultra Pipe Clamps

  • Weight: 17 pounds;
  • Power source: Electricity;
  • Clamp size: 1”;
  • Material: Steel.

We have experienced awesome Chinese junk from Sumner. Also, pros who aim for their grade-suited pipe clamp, which is worth their money, can select it. Does not include an innovative mechanism similar to the previous one.

Why did we name it an ultra pipe clamp? The answer lies in its construction and fitting compatibility. It is a 3-point precision alignment. Makes the reinforced fitting, ranging from 1”-12” pipes and tubes more accurate, like a fast pro, does. 

Thick layered or double-walled steel plate assures lasting applications as long as possible. Want more? Go ahead with it for rapid action, in shortage of doubts. However, its price-to-weight ratio may turn your interest off sometimes.

What we liked 

  • Unique 3-point precision alignment;
  • Wide range of threading suitability;
  • Thick-walled steel construction;
  • Very durable.


  • Expensive.

5. Strong Hand Tools CPL45 Pipe Fit-Up Clamps

  • Weight: 3.15 pounds;
  • Material: Metal.

However, we include this for some similar compatibility that a pipe clamp has. But in particular, it is a pipe welding aligned single unit. Quite less weighing than other models, this portable clamp offers a relatively rapid and pleasing fit-up of round-shaped pipe, at the same time flanges for butt welding.

Moreover, the pipe loading and unloading are so easy that you will turn to buy it repeatedly after the unlimited usage. Somehow, the additional dimensions, such as 3-dimensional screwing on projects, get the job done faster. As well, the dimensions give more strength for enough stabilization, which is beyond your imagination. This is quite fun while the steel contacts 3.5” clamp rods without tipping over.

The basic patent, including the 3-point alignment, often lets you depart the bare counterpart in the throat. And, yes, it can hold up to 4”, like the ’90s.

What we liked 

  • Enough room for bevel;
  • 3-point steel precision alignment;
  • Fine adjustment screws;
  • Easy tube loading and unloading;
  • Wider clamp rods.  


  • Found nothing.

6. Yost Tools YPCY34 Cast Iron Mounting Pipes

  • Weight: 3.53 pounds;
  • Material: Cast iron;
  • Clamping jaws 1-1/2″ Tall;
  • Clamp size: .5”.

Next is on the top of the affordability scorecard. Designed entire cast-iron construction features .5” fitted clamps, which becomes a breeze for smaller projects that require less hand gripping interference. Compared to other models, its general jaws’ height is beyond our expectation, about 1.5-inches. In particular, it announces a clear and easy tightening or loosing of the jaws to fit your similar crumbed workpieces.   

Though the manufacturer stated no availability of pipes with the toolbox. Whether assembling higher acquisition features at this budget is not a big deal, we guess. Else, roaming around to shop for a well-furnished pipe can make you sweat. If you find a threading-compatible one, it is right for you.

A  drawback may drag you behind for its drop-forged iron construction. As well, it may leave a soon-to-rust problem instead of having it with S.S. wrapped. Though the clamps got electroplated, the powder coating may nullify the issue.

What we liked 

  • Reasonable; 
  • Durable metallic construction;
  • Perfect for smaller projects;
  • Strengthen itself by powder coating;
  • A generous clamping clearance.


  • Incompatible threading causes self-fatigue.

7. Irwin 224134 Quick-Grip Pipe Clamp

  • Weight: 1.6 pounds;
  • Clamp size: .75”.

Want to invest in a pipe clamp, which will eliminate the threading compatibility issue? Well, Irwin 224134 will lead you to the innovative clutching, which means, switching to a rare threading-and-screwing system. 

Compared to previous pipe clamps, their larger feet and expandability, are clear in between the distance of your work surface and handle. Speaking of the handle, the unit features a really oversized one. Gives users, especially the newbies, a better experience while fixing their desired workpiece. 

On top of that, as much as you need, expand the large feet, and stabilize both. However, its non-conformist design is effective. 

It’s offering big clutch plates that are very vital. At the same time, it is less effort releasing time, which may increase its working durability—featuring more than your expectation comes possibly with a comparative to higher costs than the previous fantastic models. But the trending cranks may slip off the pipe, as well, and can impede purchasing. 

What we liked 

  • Double thread design;
  • Ergonomic handle;
  • Safer clearance between work surface and arms;
  • Bigger feet.


  • Not well-furnished cranks;
  • Hefty-priced.

8. Novsino Stainless Steel Wall Mount Pipes

  • Weight: 12.8 pounds;
  • Clamp size: .75”;
  • Material: Stainless steel;
  • Package includes 6 screws and anchors, 2 clamps.

This is another set that comes with a package of 2 pipe clamps and 6 pcs divided into 3 anchors and 3 screws. This means to uniform reinforced materials that may become more useful than the previous patented ones. As if it happens when someone needs a pair of clamps for several projects. 

Well, the package is budget-friendly too, to meet up your usual threading requirements. Concerning durability, the entire body comes with S.S. material in construction. So, if you were worrying about previous patents’ corroding overtime, this time, you do not have to. Even washing after usage will diminish such a problem. 

Speaking of its stability, a broader base will never let you achieve something like that in the most challenging time.   

What we liked

  • A pair of pipe clamps;
  • Durable material-made body;
  • Inexpensive;
  • Fast for a stable, wider base.


  • Not yet for heavy-duty usage. 

9. Lokman 44 Pcs Stainless Steel Pipe Clamps

  • Weight: 1.10 pounds;
  • Material: 304 stainless steel;
  • Style: P;
  • Clamp size: 3/16-inch to 3”;
  • Clamp hole diameter: 1/4“.

Another cable clamp with an innovative P-shape pipe, set of 44Pcs, and manufactured by Lokman. It is a standard thin pipe clamp set, different from similar models, though we have not explained something like that yet.

On top of that, the premium grade, as in 304 S.S. in construction, increased our threading pipes’ performance. The P-shape is so flexible and convenient. Whenever it is time to install some, you can do all bending/twisting/ in some way you want to manipulate it.

Included rubber cushion around the outside edge, 15mm in diameter will make your task quite easy, just like us. The clamp sizes and the width of plates all intend to reuse for the longest time. Even the 1” clamps are also suitable for huge projects that we have never experienced with previous models. However, not sufficient as a single piece, in the case of automotive and windshield categorized industries. 

What we liked 

  • Suitable for more significant projects;
  • Unique P-shape;
  • No-soon-to-rust issues;
  • Durable and reusable.


  • Require multi-piece purchase.

10. Pony 50 Pipe Clamps

  • Weight: 2.44 pounds;
  • Material: Cast iron;
  • Clamp size: .75”.

Last but not least decent pipe clamps in our listing, manufactured by Pony. The easy working standard features, including the .75” threading compatibility on less big projects and basic tasks. Also, perfect for wood and metalworking, frame assembling type hard jobs. 

Both ends are threaded, and the pipe is not included in the toolbox; you may have a direct heading for industrial production. Else, this handy clamp fixture can ride up to any length of the tube and enjoy a different length clamp bars innovation. Instead of fixing tools, you can assemble these by merely screwing the joints between the head and pipe threads. Fix another end by conjoining the pipe and sliding the tail-stop.  

Cast-iron made several disc-clutch altogether, preventing pipe crushes and secure threading points. Its featured extendable clutches are used to release at ease. And no wearing at the end of the screw, due to its hardened steel thrust bearing. 

What we liked 

  • Crank-type handle;
  • 4 pcs per set disc clutches;
  • For Heavy-usage;
  • Ideal and hardened construction;
  • Basic design.


  • Cause overtime rust issues;
  • Less suitable for larger projects.

Others Solutions

Clamp Without a Clamp?

Yes, you heard right. Some may get a real surprise or some will never think as real as possible. Even it is a real possible task in woodworking projects. Once, one of our crew members tried to create a wood table end.

For the tabletop, he took 1×6 planks with groove edges and tongue. To join those planks, all about to take a good firm adhesive. Here, you can follow some hacks, for instance, weight means to take gravity advantage, off-center circles if the workpiece included, wedges, and tape.

In general, these rare tricks are followed down to join the wood pieces together, especially in musical instrument builders.

Are Parallel Clamps of Any Use?

It turns out to be determined by the ability of jaws to remain parallel to the conjoining results in a firm way. You can consider this clamp class as per your need, in case you still confuse about the attachment of the in-between parts. In simple words, the adhesive can separate your workpieces if it does not remain in good places and become instant dry. Whether it is about flat or square pieces, it is possible several times.  

You can sometimes let gravity do all it alone, but it is a joke you know. So, place your pipe in between the plates and handle a parallel clamp and make it easy.   

See also: 7 Best American-Made Grease Guns

C Clamp or F Clamps? 

Both provide essential assistance from the firm holding pieces together in many situations. Whether a G-clamp, formed as a C-clamp, is only for small projects. Whether the F-clamp offers great versatility for larger jobs. As you know that the clamp purchase depends on the job site. 

Though both in this class share the same principles, each stretches the opening mouth between the clamp ends, like a crescent wrench. 

Whether F-clamps release objects by a single lever and tighten them again by squeezing a trigger. Whether C-clamps give a small squeeze as the built-in go for slight objects. 

Final Thoughts

Searching for a pipe variety is good, as well as per your need. But overwhelming the pipe clamps’ size and variety may disturb and drag you behind from purchasing it. 

If you are encouraged enough to buy from such a wide range, you can take one more step. To read our damn awesome 10 pipe clamps thoroughly with a selection guide to enjoy better output or become a pro within months.

You might also like:

Rate this post

About This Writer

david rowan author

Hello, I am David Rowan. I am a professional contractor with 10 years of experience in home building, different tools used, construction, home remodeling, and other home improvement work. I have already built many custom homes and continued to do several woodworking projects along with how to deal with all categories of tools.

Hello, I am David Rowan. I am a professional contractor with 10 years of experience in home building, different tools used, construction, home remodeling, and other home improvement work. I have already built many custom homes and continued to do several woodworking projects along with how to deal with all categories of tools.

Leave a Comment